Throttle valve cleaner

Name: Throttle valve cleaner
Brand: Würth
SKU: 5861113500

Air intake and throttle valve cleaner
THRTLVLVECLNR-500ML

Art.-no. 5861113500

EAN 4050641867278

All versions

Individual price display after login

Throttle valve cleaner

Art.-no. 5861113500

Individual price display after login

Quantity

Exclusively for trade customers

Login/Register
Call customer service: 045-488-4186

Special, highly active system cleaner for 2- and 4-stroke engines.

Possible to clean without removing components

Overhead valve

Hard-to-reach areas can be easily accessed

Excellent cleaning performance

Optimum carburettor performance

Perfect throttle valve function

Quiet engine running

Faults caused by dirty throttle valves or carburettors are rectified.

Notice

For various throttle valve units, it is advantageous to remove them in order to be able to optimally clean the underside of the throttle valve.

Suitable for petrol engines only! Clean diesel injection nozzles only when they are removed.

The usage instructions are recommendations based on the tests we have conducted and based on our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.

Product information

Würth Catalogue

Datasheets(X)

Safety data sheet

Certificates/ Documents

Application area

Removes deposits and impurities in the intake and throttle valve area. It can also be used to clean carburettor and calibrated bores and nozzles. Suitable for catalytic converters.

Instructions

When the engine is turned off, generously spray all parts to be cleaned and allow the active agent to react for 2-3 minutes. Then, with the engine running for approx. 30 seconds, spray into the intake and throttle valve area, while slightly increasing the speed to loosen the deposits.

Contents	500 ml
Colour	Colourless
Smell/fragrance	Solvent-like
Chemical basis	Hydrocarbon
Shelf life from production	24 Month
Density	0.86 g/cm³
Density conditions	at 20°C

Suitable glove:

Product

Description

Chemical protective glove PVC w. backing fabric

Description:

Permeation level: 2

Very robust, submersible PVC glove with cotton support fabric

Nitrile chemical protective glove long, heavy-duty design

Description:

Permeation level: 2

Permeation is the process by which a chemical moves through the material of a protective glove on a molecular level. The time from the initial contact between the chemical and the glove to the permeation of the material is the breakthrough time.

Measured breakthrough time

Permeation level

< 10 min

≥ 10 min

≥ 30 min

≥ 60 min

≥ 120 min

≥ 240 min

≥ 480 min

Important information:

The information given is based on experience and laboratory conditions and is designed as a guide. However, the actual suitability of a glove depends on the individual conditions of its use and must be confirmed by an appropriate test under operational conditions. Given the variety of materials and chemicals used, the possibility of incompatibility or usage problems for the wearer cannot be excluded in individual cases. We would be happy to advise you about optimum solutions.