Customer App
Rivet nut with flat head and knurled shank
NUT-RIV-MHD-(A2K)-(3,0-5,5)-8,9X18,5-M6
Art.-no. 094822 06
EAN 4047376705272
Register now and access more than 6,000 products
- Chromium(VI)-free: complies with the EU End-of-Life Vehicles Directive.
- Rivet nuts combine blind rivet and screw fastening, enabling load-bearing screw connections in thin-walled structural components.
- The knurled shank increases resistance to rotation, allows higher tightening torques, and is suitable for fastening in all materials, particularly aluminium, plastic and fibreglass.
The specified extraction values are guideline values, and the information may vary for this reason, depending on the workpiece, drilled hole tolerance and roughness of the surface.
Datasheets(X)
 | |
Material | Steel |
Surface | Zinc plated |
RoHS-compliant | Yes |
Thread type x nominal diameter (D) | M6 |
Length (l1) | 18.5 mm |
Head diameter (d1) | 12.0 mm |
Outer diameter (d2) | 8.9 mm |
Head height (k1) | 1.6 mm |
Min./max. grip range (s1) | 3.0-5.5 mm |
Tensile fracture load | 17640 N |
Shear-fracture load | 3430 N |
Max. tightening torque | 20 Nm |
Drill hole diameter | 9.1 mm |
Shank detail | With knurled shank |
Head type | Dome head |
Last viewed
JIS B1187 steel 7T zinc plated notched hex. head
3/8 inch cardan joint
1/2 inch socket wrench insert metric, hexagon, short
ASSY 4 CSMP universal screw Steel zinc plated partial thread countersunk milling pocket head
ASSY 4 CSMP universal screw Steel zinc plated partial thread countersunk milling pocket head
System box separating element
Cable grommet, double-sided
System box separating element
Single wire seal (SEAL) For uninsulated cable connector
Pin punch in accordance with DIN 6450 form C with hardened impact head