HT brake protection - BRKPAST-PROTECTION-HT-SPR-300ML

HT brake protection

Name: HT brake protection
Brand: Würth
SKU: 0893816

Brakes protection spray HT
BRKPAST-PROTECTION-HT-SPR-300ML

Art.-no. 0893816

EAN 4045989800940

All versions

Similar products

Prices for customers after login

HT brake protection

Art.-no. 0893816

Prices for customers after login

Quantity

Exclusively for trade customers

Login/Register
Call customer service: 045-488-4186

Lubricating, separating and anti-corrosive paste extremely resistant to high temperatures and high pressures

Metal-free

Does not harm sensors on brake systems

Suitable for ABS brake systems and ASR and ESP systems

Heat-resistant up to 1400°C

Permanent and high level of lubrication thanks to ceramic components

Resistant to diluted acids, bases, spray water and salt water

Silicone- and AOX-free

Resistant to high pressures

Notice

Do not apply to brake discs and brake friction lining

Shake the aerosol thoroughly

The usage instructions are recommendations based on the tests we have conducted and our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.

Product information

Würth Catalogue

Datasheets(X)

Certificates/ Documents

Application area

Lubricating, separating and anti-corrosive paste for parts in vehicle brake systems, installation aid on machines etc.

For preventing run-in damage and wear on bearings, sliding points, screw and plug connections.

Contents	300 ml
Weight of content	295 g
Container	Aerosol can
Colour	Light grey (bright grey)
Smell/fragrance	Characteristic
Chemical basis	Mineral oil
Shelf life from production	12 Month
Density	0.973 g/cm³
AOX-free	Yes
Silicone-free	Yes
Metal-free	Yes

Suitable glove:

Product

Description

Nitrile chemical protective glove Long, heavy-duty design

Description:

Permeation level: 6

Permeation is the process by which a chemical moves through the material of a protective glove on a molecular level. The time from the initial contact between the chemical and the glove to the permeation of the material is the breakthrough time.

Measured breakthrough time

Permeation level

< 10 min

≥ 10 min

≥ 30 min

≥ 60 min

≥ 120 min

≥ 240 min

≥ 480 min

Important information:

The information given is based on experience and laboratory conditions and is designed as a guide. However, the actual suitability of a glove depends on the individual conditions of its use and must be confirmed by an appropriate test under operational conditions. Given the variety of materials and chemicals used, the possibility of incompatibility or usage problems for the wearer cannot be excluded in individual cases. We would be happy to advise you about optimum solutions.