Customer App
Rivet nut with flat head
NUT-RIV-MHD-(A2B)-(0,5-3,5)-18X10,9-M8
Art.-no. 0917280
EAN 4046778985886
Register now and access more than 6,000 products
- Rivet nuts can be used as riveted and screwed connections, offering both secure connections and the ability to easily mount additional components using conventional screws.
- Installation from one side, therefore also suitable for closed profiles.
- Simple, fast and mostly automatic installation.
- No countersinking of drill holes required.
- Consistently high installation quality.
- Anti-rotation connection with load-bearing thread.
- Improved cost-efficiency thanks to faster installation, secure connections and improved quality.
The specified extraction values are guideline values, and the information may vary for this reason, depending on the workpiece, drilled hole tolerance and roughness of the surface.
Datasheets(X)
Especially suitable for achieving high turning resistance in soft materials, such as aluminium, wood, plastic etc.
 | |
Material | Steel |
Surface | Zinc plated |
Thread type x nominal diameter (D) | M8 |
Head diameter (d1) | 15.0 mm |
Outer diameter (d2) | 10.9 mm |
Length (l1) | 18 mm |
Head height (k1) | 1.5 mm |
Min./max. grip range (s1) | 0.5-3.5 mm |
Drill hole diameter | 11.0 mm |
Tensile fracture load | 22000 N |
Shear-fracture load | 5200 N |
Max. tightening torque | 25 Nm |
Head type | Dome head |
Last viewed
Metric XZN bit 10 mm hexagon drive
ASSY 4 WH washer head screw Steel zinc plated partial thread washer head
Metric double box-end wrench with POWERDRIV®
Snap-off blade
T-handle 2-component hex key
Gas filter ABEK1 For breathing protection series 175
1/4 INCH EXTENSION
TIME-SERT thread repair single set 14 pieces
COMBINATION PLIER REDSTRIPE
TX screwdriver with round shank