Customer App
Clamping pin/clamping sleeve, slotted, heavy-duty design ISO 8752 spring steel plain
ISO 8752 steel plain
SPGPIN-ISO8752-ST-13X120
Register now and access more than 10,000 products
- Securing elements, used in a similar way to grooved pins
- For use as sleeves for bolts/screws, predominantly in applications where significant shearing forces occur
- Strain on bolts and screws is relieved, allowing smaller sizes to be used
- 0.2–0.5 mm oversize compared with the nominal diameter guarantees a secure, firm fit
- Tapered end makes it easier to insert the part into the hole
- Pins can be removed again without causing damage
The hole diameter is the same as the nominal diameter (tolerance 12 H).
Datasheets(X)
CAD data (available after login)
 | |
Nominal diameter (d1) | 13 mm |
Length (l1) | 120 mm |
Material | Spring steel |
Surface | Plain |
RoHS-compliant | Yes |
Design | Heavy-duty design |
Standards | ISO 8752 |
Last viewed
1/2 inch impact socket wrench insert DIN 3121/ISO 1174
Vacuum/pressure hose For window repair
ORSY® 10 dispenser system For heat shrink hoses
VDE screwdriver, flat slotted
Blade receptacle Uninsulated
Release tool For connectors with two symmetrically arranged locking lugs
1/2" socket wrench insert Triple square, long
Screwdriver PH 3C handle with hexagon shank
Tensioning washer For screw connections DIN 6796, spring steel C60, mechanically applied zinc coating
JIS B1181 steel zinc plated class 1