Battery terminal protector

Name: Battery terminal protector
Brand: Würth
SKU: 0890104

Battery terminal protector
BTRYTRMLPROT-150ML

Art.-no. 0890104

EAN 4065746006958

All versions

Prices for customers after login

Battery terminal protector

Art.-no. 0890104

Prices for customers after login

Quantity

Exclusively for trade customers

Login/Register
Call customer service: 045-488-4186

Long-term and temperature-resistant protection for battery terminals

Protects battery terminals, pole terminals and plug connections from corrosion, weather and battery acids

Prevents transfer resistances and voltage drops, thereby extending the battery life.

Notice

Caution: Do not spray on paint! Immediately remove residues from the lacquer with brake cleaner; otherwise spots may form.

The usage instructions are recommendations based on the tests we have conducted and based on our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.

Product information

Würth Catalogue

Datasheets(X)

Certificates/ Documents

Instructions

Shake can before use. Thoroughly clean and mount the battery terminals, pole terminals etc., and spray a thin coat on all sides.

Contents	150 ml
Colour	Blue
Smell/fragrance	Solvent-like
Chemical basis	Dimethacrylic acid ether
Shelf life from production	24 Month
Density	0.868 g/cm³
Density conditions	at 20°C
Silicone-free	Yes
Min. temperature conditions	-40 °C
Max. temperature conditions	120 °C
AOX-free	Yes

Suitable glove:

Product

Description

Nitrile chemical protective glove Long, heavy-duty design

Description:

Permeation level: 2

Permeation is the process by which a chemical moves through the material of a protective glove on a molecular level. The time from the initial contact between the chemical and the glove to the permeation of the material is the breakthrough time.

Measured breakthrough time

Permeation level

< 10 min

≥ 10 min

≥ 30 min

≥ 60 min

≥ 120 min

≥ 240 min

≥ 480 min

Important information:

The information given is based on experience and laboratory conditions and is designed as a guide. However, the actual suitability of a glove depends on the individual conditions of its use and must be confirmed by an appropriate test under operational conditions. Given the variety of materials and chemicals used, the possibility of incompatibility or usage problems for the wearer cannot be excluded in individual cases. We would be happy to advise you about optimum solutions.