Customer App
Window construction screw, self-drilling, countersunk milling head, FEBOS® M
FEBOS M steel zinc plated counters. milling head H
SCR-DBIT-CS-CUTHD-H2-(A2K)-M4X16
FEBOS
Register now and access more than 10,000 products
- Metric thread
- Self-drilling window construction screw for use in UPVC window construction
- For connecting UPVC profiles with the metal reinforcement (up to 2.5 mm) and for securing fittings on profiles with metal stiffening (up to 2.5 mm)
- Greater load capacity threads with thin sheathing iron
The risk of forced advance with large distances between plastic and metal bracing is minimised by the flat, metric thread
If forced advance occurs, the drill tip may break away or the screw break during application.
Datasheets(X)
CAD data (available after login)
 | |
Material | Steel |
Surface | Zinc plated |
RoHS-compliant | Yes |
Nominal diameter (d1) | 4 mm |
Length (l1) | 16 mm |
Head diameter (dk) | 7.5 mm |
Head height (k1) | 2.2 mm |
Drill tip length (lp) | 5.2 mm |
Internal drive | H2 |
Head type | Countersunk milling head |
Drill tip diameter | 3.4 mm |
Shape of tip | Drilling tip |
Other standard | WN 207 |
Declaration of performance (EU-CPR) | No |
Thread type | Metric thread |
Thread design | Full thread |
Last viewed
O-ring, imperial NBR 70
Plastic rivet without pin, type S
Polishing pads
Hexagon Socket Head Cap Screw ISO 4762/DIN 912, steel 8.8, zinc-plated, blue passivated (A2K)
Flat connector Micro Timer (MT II+III) 1.6
Sealing tape VKP® TRIO
Fixing clamp
1/2 inch and 1/4 inch socket wrenches Assortment of 56 pieces
Twist drill bit HSS DIN 338 type RN 130°
VKP® PLUS sealing tape