Tyre fitting spray Premium
Tyre fitting spray Premium
TYRFITTSPR-PREMIUM-400ML
Register now and access more than 10,000 products
Excellent creeping and sliding properties
Eases the installation of tyres and protects tyres from damage
Dries quickly and evenly
Prevents tyres slipping on the rims
Leaves no visible residue on the rim edge or tyre
The usage instructions are recommendations based on the tests we have conducted and our experience; carry out your own tests before each application. Due to the wide range of applications and of storage and usage conditions, we cannot guarantee a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee the consistent quality of our products. We reserve the right to make technical changes and further develop products.
Datasheets(X)
For assembly and disassembly of all types of tyres. Particularly suitable for run-flat tyres with emergency running properties, low-profile tyres as well as for motorcycle tyres.
Apply tyre mounting spray to the rim flange and tyre bead. Then mount or remove the tyre as specified. Prior to assembly, remove old assembly agent residue and dirt in the sealing area of the rim.
Contents | 400 ml |
Weight of content | 360 g |
Colour | Transparent |
Viscosity/consistency | Liquid |
Chemical basis | Inorganic soap basis |
Shelf life from production | 60 Month |
Density | 0.9 g/cm³ |
Density conditions | at 20°C |
Min. processing temperature | -15 °C |
Max. processing temperature | 50 °C |
pH value | 5.0-8.0 |
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!