Customer App
Thread die HSS DIN EN 22568 for standard metric ISO threads
Threaded die HSS DIN 13-1
THRDIE-HSS-DIN223-M10
Register now and access more than 10,000 products
Two-sided cut
- Can be used on both sides
- Threads can be cut in one process
- Easy cutting and excellent chip removal in cutting direction
High edge retention
Datasheets(X)
The die is placed in the die holder at the height of the middle screw. The screws are tightened with a screwdriver. The die is placed vertically on the workpiece. Can be used on both sides. When cutting, sufficient cutting oil must be added. After two revolutions, the cut can be broken by briefly turning back.
Type description | For metric ISO thread DIN 13 |
Cutting material | HSS |
Surface | Plain |
Thread type | Metric thread |
Form | B |
Tolerance class | 6g |
Thread type x nominal diameter | M10 |
Pitch | 1.5 mm |
Outer diameter | 30 mm |
Height | 11 mm |
Material to be processed | Steel, Cast iron |
Last viewed
Screwdriver PH short with round shank
Flat blade fuse MINI Silver
Contact disc
Dry abrasive paper disc wood KP perfect
Interference suppression band
HT brake protection
Thread repair single set TIME-SERT® 14 pieces
Masking tape for surface protection
Flat blade fuse ATO set 10 pieces
Hexagonal bolt with thread up to the head ISO 4017, steel 8.8, zinc-plated, blue passivated (A2K)