Customer App
Thread die HSS DIN EN 22568 for metric ISO fine threads
Threaded die HSS DIN 13-2
THRDIE-HSS-DIN223-M8X1
Register now and access more than 10,000 products
Two-sided cut
- Can be used on both sides
- Threads can be cut in one process
- Easy cutting and excellent chip removal in cutting direction
High edge retention
Datasheets(X)
The die is placed in the die holder at the height of the middle screw. The screws are tightened with a screwdriver. The die is placed vertically on the workpiece. Can be used on both sides. When cutting, sufficient cutting oil must be added. After two revolutions, the cut can be broken by briefly turning back.
Type description | For metric ISO fine thread DIN 13 |
Cutting material | HSS |
Surface | Plain |
Thread type | Metric fine thread |
Form | B |
Tolerance class | 6g |
Thread type x nominal diameter | MF8 |
Pitch | 1.0 mm |
Outer diameter | 25 mm |
Height | 9 mm |
Material to be processed | Steel, Cast iron |
Last viewed
Washer with large outside diameter DIN 9021 (with large outside diameter), steel, zinc-plated, blue passivated (A2K)
3/8 inch socket wrench insert metric, hexagon, short
Electrical insulating tape
Flat blade fuse ATO set 10 pieces
Double open-end wrench assortment
Slotted raised countersunk head screw DIN 964, steel 4.8, zinc-plated, blue passivated (A2K)
Multiple plug housing for blade connectors 2.8 x 0.5 mm
Heat-resistant paint spray
Aluminium wheel rim cleaner
Multi-point housing For blade connector 6.3 x 0.8 mm