Customer App
Thread die HSS DIN EN 22568 for metric ISO fine threads
Threaded die HSS DIN 13-2
THRDIE-HSS-DIN223-M22X1,5
Register now and access more than 10,000 products
Two-sided cut
- Can be used on both sides
- Threads can be cut in one process
- Easy cutting and excellent chip removal in cutting direction
High edge retention
Datasheets(X)
The die is placed in the die holder at the height of the middle screw. The screws are tightened with a screwdriver. The die is placed vertically on the workpiece. Can be used on both sides. When cutting, sufficient cutting oil must be added. After two revolutions, the cut can be broken by briefly turning back.
Type description | For metric ISO fine thread DIN 13 |
Cutting material | HSS |
Surface | Plain |
Thread type | Metric fine thread |
Form | B |
Tolerance class | 6g |
Thread type x nominal diameter | MF22 |
Pitch | 1.5 mm |
Outer diameter | 55 mm |
Height | 16 mm |
Material to be processed | Steel |
Last viewed
Bevelled-edge chisel
Flat washer For hexagon head bolts and nuts DIN 125, A2 stainless steel
Hand tap set HSS, DIN 352 3 pieces
Combination wrench assortment, short type
1/2 inch cardan joint
Black NBR70 round cord
Single wire seal (SEAL) For uninsulated cable connector
1-inch impact socket wrench insert hexagon, metric, short
Pin with nut For screw extractor set
Solder cable lug DIN 46211