Customer App
Thread die HSS DIN EN 22568 for metric ISO fine threads
Threaded die HSS DIN 13-2
THRDIE-HSS-DIN223-M14X1,25
Register now and access more than 10,000 products
Two-sided cut
- Can be used on both sides
- Threads can be cut in one process
- Easy cutting and excellent chip removal in cutting direction
High edge retention
Datasheets(X)
The die is placed in the die holder at the height of the middle screw. The screws are tightened with a screwdriver. The die is placed vertically on the workpiece. Can be used on both sides. When cutting, sufficient cutting oil must be added. After two revolutions, the cut can be broken by briefly turning back.
Type description | For metric ISO fine thread DIN 13 |
Cutting material | HSS |
Surface | Plain |
Thread type | Metric fine thread |
Form | B |
Tolerance class | 6g |
Thread type x nominal diameter | MF14 |
Pitch | 1.25 mm |
Outer diameter | 38 mm |
Height | 10 mm |
Material to be processed | Steel, Cast iron |
Last viewed
pias® drilling screw with hexagon head and drill tip Case-hardened steel, zinc-plated, blue passivated
Flat blade fuse ATO ISO 8820-3
Hose clamp with asymmetrical lock
Wing repair washer According to DIN 522, zinc-plated steel, blue passivated (A2K)
Plastic plug-in connectors
Screw connection seal
High-gloss polish P20 Plus
Sound-absorbing lining
Hexagonal bolt with thread up to the head DIN 933, steel 8.8, zinc-plated, blue passivated (A2K)
Release tool For round connectors with locking lugs