Customer App
Separator
Separator tool
SEPRTL-SPNW155MM
Register now and access more than 10,000 products
- This separator is used if puller hooks cannot reliably grip the part being extracted as it is seated too closely. The separating blades are mounted between the parts and pressed against each other. The wedge shape of the separating blade separates the assembly.
- The separator can also be used to remove thin parts, as the pull-off force acts on a large area. Prevents undesirable deformations and damage. The separating blades are mounted with the flat surface under the part to be removed.
- Drop-forged and hardened separating blades
- High-strength clamping screws
Datasheets(X)
 | |
Min./max. internal clamping width (A) | 30-155 mm |
Width of clamping jaw (B) | 215 mm |
Spindle length (C) | 310 mm |
Min./max. hole distance (E) | 137-262 mm |
Material of separating blade | Vanadium steel |
Surface of the separating blade | Zinc plated |
Thread dimension | M18 x 1.5 |
Last viewed
Exhaust slotted nut, reduced wrench size DIN 14441 heavily copper-plated steel
PVC insulating hose
Water pump pliers DIN ISO 8976
BMF workshop cleaner
Cable grommet, double-sided
Adhesive sealing tape EURASOL® MAX
Spring lock washer, shape B DIN 137, spring steel, mechanically applied zinc coating, shape B, corrugated
Pneumatic chipping hammer DMH 10
Twist drill bit HSS DIN 338 type RN 130°
Steel trivalent chromate