Customer App
Separator
Separator tool
SEPRTL-SPNW155MM
Register now and access more than 10,000 products
- This separator is used if puller hooks cannot reliably grip the part being extracted as it is seated too closely. The separating blades are mounted between the parts and pressed against each other. The wedge shape of the separating blade separates the assembly.
- The separator can also be used to remove thin parts, as the pull-off force acts on a large area. Prevents undesirable deformations and damage. The separating blades are mounted with the flat surface under the part to be removed.
- Drop-forged and hardened separating blades
- High-strength clamping screws
Datasheets(X)
 | |
Min./max. internal clamping width (A) | 30-155 mm |
Width of clamping jaw (B) | 215 mm |
Spindle length (C) | 310 mm |
Min./max. hole distance (E) | 137-262 mm |
Material of separating blade | Vanadium steel |
Surface of the separating blade | Zinc plated |
Thread dimension | M18 x 1.5 |
Last viewed
Flat connector contact Junior Power Timer (JPT) 2.8
Hand tap, third tap HSS DIN 2181
Twist drill bit HSS DIN 338 type RN 130°
Thin-walled heat-shrink hose Shrink rate 2:1 without internal adhesive
PURlogic® Flex 1-C gun foam
1/2" multi-socket wrench one tool for all applications
Stud with threaded end ≈ 1.25 d DIN 939, steel 8.8, plain
1/4" socket wrench insert metric, long
Battery terminal protector
3/8 inch impact connector With 1/2 inch square drive and ball lock