Customer App
Sealing tape VKP BASIC
SEALTPE-(VKP-BASIC)-(20/12-20)-BLCK-6,5M
Art.-no. 0875120018
EAN 4045727497067
Register now and access more than 6,000 products
Tested tape quality with driving rain resistance of 300 Pa
- Can be used up to a building height of 20 m
Tested resistance to direct weather exposure and UV
- Increased safety and an extended range of applications thanks to additional testing
- Prevents complaints and costly rework
High tolerance capacity of tape
- Tape also reliably seals joints with tolerances
- Saves money by reducing number of tape sizes required
Time-saving application
- No pre-treatment with primer is necessary
- No processing tools are required
Pre-compressed and self-adhesive
- The pre-compressed, one-sided self-adhesive VKP Basic sealing tape seals joints reliably and permanently in a single step
- After the compression is released, the sealing tape develops a resilience that presses firmly against the joint edges and compensates for uneven areas of the joint
- Depending on the length of time installed, the non-adhesive side may anchor slightly to the adjacent material
Select the correct tape size:
- Define the joint widths from the structure and classify in the "resistance to driving rain" scale
- Then select the required tape size
- Select the art. no. according to the tape colour
- Define the roll quantity
Additional notes:
- The expansion speed of VKP Basic depends on the temperature
- The tape's expansion behaviour is not subject to any particular specification and is based only on empirical values
- The tape's reset time depends on the storage and processing temperature. The following applies: The longer the storage times and the lower the application temperature, the longer the reset times.
- In high temperatures, store the tape in a cool location; in low temperatures, store in a warm location
** Only where installed in a manner resistant to driving rain
The usage instructions are recommendations based on the tests we have conducted and our experience. Carry out your own tests before each application. Due to the large number of applications as well as storage and usage conditions, we do not assume any liability for a specific application result. Any technical information or advice provided by our free customer service shall be provided to the exclusion of any liability, unless the advice or information is part of our contractually agreed scope of services or the advisor was acting wilfully. We ensure the consistent quality of our products. We reserve the right to make technical changes and further developments to our products.
Datasheets(X)
- For sealing against the effects of wind, sunlight and rain and for preventing heat loss in accordance with the stipulations of the Energy Conservation Ordinance and the RAL quality assurance association
- Can be exposed to direct weathering
- In construction: Expansion joints, window connections, sealing between prefabricated parts, partition walls etc.
- General industry: Container construction, air-conditioning units, machine and equipment engineering etc.
Colour | Black |
Chemical basis | Fine open-cell polyurethane foam |
Width | 20 mm |
Min./max. joint width for watertightness in driving rain | 12-20 mm |
Length of roll | 6.5 m |
Min. resistance against driving rain (pressure)/conditions | 300 Pa / in accordance with DIN EN 1027 |
Building material class/conditions | B2 - Normally inflammable / in accordance with DIN 4102 |
Ultraviolet resistance | Yes, when installed to be resistant to driving rain |
Min./max. temperature resistance | -30 to 90 °C |
Shelf life from production | 18 Month |
Conditions to maintain shelf life from production | at 5°C to 25°C |
Last viewed
1/4" socket wrench insert for hexagon socket, metric
Double-sided adhesive tape
Glass socket bulb
JIS B1180 steel 7T zinc plated yellow
C 6.3 slotted bit (1/4 inch)
Multi-leather coat SP-1400
1/2" socket wrench insert for TX screws, short
Brake line nipple, type F
Cutting pliers for plastic pipes up to dia. > 22 mm
Expanding nut