Customer App
Screw connection seal
Screw connection seal
UN-RG-SEAL-1IN-32X44MM
Register now and access more than 10,000 products
- High pressure resistance
- High thermal stability
- DVGW-approved
- KTW-approved
Since temperature and pressure are mutually dependent, simultaneous stressing of the seal with the maximum values is not possible. In addition, the specifications depend on the respective medium. This means that these details can serve only as a guideline, due to the wide variety of possible applications.
Datasheets(X)
For flat-sealing pipe screw connections used in:
- Sanitation and heating systems (gas and water supply)
- Pipeline construction
- Systems engineering
- Mechanical engineering
 | |
Material | Raw material combination consisting of high-quality aramide fibres, special filling materials and elastomers |
Colour | Green |
Internal diameter x external diameter x thickness (d1 x d2) | 32 x 44 x 1.8 mm |
Suitable for steel pipe (imperial) | 1 inch |
Max. operating pressure | 100 bar |
Max. temperature resistance | 200 °C |
Max. short-term temperature resistance | 250 °C |
Approval mark | KTW recommendations |
Asbestos-free | Yes |
Resistance against | Water (good), Gas (good), Steam (good), Oil (good), Acid (good), Lye (good) |
Last viewed
1/2 inch POWERDRIV® socket wrench insert metric, bi-hex, long
Hexagonal bolt with thread up to the head ISO 4017, steel 8.8, zinc-plated, blue passivated (A2K)
Countersunk tapping screw shape C with H recessed head DIN 7982, steel, zinc-plated, blue passivated (A2K)
Pozidriv screwdriver (PZ) with hexagon shank
Heat-shrink crimp connector push connector
AW® bit
1-ear clamp with insert ring
System insert 2.4.1, empty compartment
Flat connector Junior Power Timer (JPT) 2.8
Flat blade fuse MINI Silver