Customer App
Scale Remover 300 ml
Scale remover for vehicle body
LIMREM-300ML
Register now and access more than 10,000 products
- Scale on vehicle bodies can be easily removed by soaking a cloth with the liquid and wiping it off.
- Significantly reduces polishing work and improves work efficiency.
- Not subject to the Poisonous and Deleterious Substances Control Act (does not use hydrofluoric acid)
- Not subject to organic solvent regulations
- Not subject to the Fire Service Act
- Always wear protective equipment.
- If the product comes into contact with the skin, wash it off immediately.
- Make sure that it does not cause abnormalities such as discolouration, fading, uneven colouring, or peeling of the coating surface by testing on an inconspicuous place before use.
- The product has no effect on water spots.
- If used on a vehicle with a coating, the coating may be removed. (If there are scale deposits under the coating, the coating must be removed.)
- The product is a highly corrosive solvent on metal and glass, so be careful not to apply it to these materials.
- Note that the product cannot be used on windscreens, scratched glass, magnesium wheels, polished wheels, anodised areas, aluminium wheels and aluminium moulding without a clear coating, deteriorated resin parts, specially processed products, and unpainted metal parts.
Datasheets(X)
1. Always wear protective equipment.
2. Shake the bottle several times before use with the pointed cap and stopper attached.
3. Rinse the application area with water and wash off sand and dust. If there are any residual greasy substances such as wax on the surface, clean them off beforehand.
4. Gently wipe off the moisture, then soak a cloth or similar in the product and wipe it over the application surface.
5. Wet a new cloth with water and wipe the application areas. Please note that prolonged contact with the product may have an effect on some materials.
6. Check how much scale has been removed, and repeat the operation if it has not been removed.
7. After the work is completed, rinse the application area with a large amount of water, and rinse all used items with neutral detergent or water.
Contents | 300 ml |
Product weight (per item) | 341.000 g |
Container | Plastic bottle |
Chemical basis | Water |
Colour | Transparent |
Density/conditions | 1.02 g/cm³ / at 25°C |
Min./max. processing temperature | 0 to 40 °C |
Shelf life from production/conditions | 2 Years / at 2°C to 40°C |
Phosphate-free | Yes |
Last viewed
Flat chisel For pneumatic chipping hammers
Ratchet bit assortment, 10 mm 38 pieces
1/2 inch socket wrench insert metric, hexagon, short
O-ring, metric
Oil binder Road
Interior trim clip, type S
Twist drill bit HSS DIN 338 type RN 130°
Zinc clip-on wheel weight For car aluminium rims
TFT/LCD cleaner
Scraper blade