Customer App
Rivet nut with flat head and knurled shank
Dome head steel zinc plated knurled shank open
NUT-RIV-MHD-(ZN)-(0,5-3)-5,9X11,0-M4
Register now and access more than 10,000 products
Chrome (VI)-free: complies with the EU End of Life Vehicles Directive
- Rivet nuts combine two types of fastening: A blind rivet connection and an additional screw connection.
- This primarily enables screw connections to be used in relatively thin-walled structural elements.
Advantages of knurled shaft:
- Increased tightening torques and resistance to turning
- Suitable for fastening all materials, especially aluminium, plastic and fibreglass
The specified extraction values are guideline values, and the information may vary for this reason, depending on the workpiece, drilled hole tolerance and roughness of the surface.
Datasheets(X)
CAD data (available after login)
 | |
Material | Steel |
Surface | Zinc plated |
RoHS-compliant | Yes |
Thread type x nominal diameter (D) | M4 |
Length (l1) | 11 mm |
Head diameter (d1) | 9.0 mm |
Outer diameter (d2) | 5.9 mm |
Head height (k1) | 1.1 mm |
Min./max. grip range (s1) | 0.5-3.0 mm |
Tensile fracture load | 7840 N |
Shear-fracture load | 1660 N |
Max. tightening torque | 4.5 Nm |
Shank detail | With knurled shank |
Head type | Dome head |
Last viewed
Double open-end wrench
Hexagon head bolt DIN EN 14399-4, steel 10.9, hot-dip galvanised (hdg), for high-strength structural bolting assembly
3/8 inch socket wrench insert metric, hexagon, short
Rechargeable LED Hand Lamp WL1 LED 6+1 W
Aluminium paste AL 1100
Activator
Brushes For tyre fitting paste
C 6.3 PH bit (1/4 inch)
Speed cutting disc For stainless steel
Pan head tapping screw, C shape with H recessed head DIN 7983, steel, zinc-plated, blue passivated (A2K), shape C, H cross recess