Customer App
Rivet nut with flat head and knurled shank
Dome head aluminium knurled shank open
NUT-RIV-MHD-ALU-(0,5-3,0)-6,9X13,0-M5
Register now and access more than 10,000 products
- Rivet nuts combine two types of fastening: A blind rivet connection and an additional screw connection
- This primarily enables screw connections to be used in relatively thin-walled structural elements
The specified values relating to the maximum tractive force of the thread and the maximum tightening torque are guideline values. For this reason, the information may vary depending on the workpiece, drilled hole tolerance and roughness of the surface.
Datasheets(X)
CAD data (available after login)
 | |
Material | Aluminium |
Surface | Plain |
RoHS-compliant | Yes |
Thread type x nominal diameter (D) | M5 |
Length (l1) | 13 mm |
Head diameter (d1) | 10.0 mm |
Outer diameter (d2) | 6.9 mm |
Head height (k1) | 1.1 mm |
Min./max. grip range (s1) | 0.5-3.0 mm |
Tensile fracture load | 4900 N |
Shear-fracture load | 1170 N |
Max. tightening torque | 5 Nm |
Drill hole diameter | 7.0 mm |
Shank detail | With knurled shank |
Head type | Dome head |
Last viewed
Abrasive cloth
VDE side cutters, DIN ISO 5749 IEC 60900
Hexagonal bolt with thread up to the head ISO 4017, steel 8.8, zinc-plated, blue passivated (A2K)
Window clip
1/2 inch cardan joint
Flat connector 6.3 Uninsulated
Hose clamp with asymmetrical lock
Wing repair washer According to DIN 522, zinc-plated steel, blue passivated (A2K)
Branch connector detachable For branch connections in any desired position
JIS B1180 steel 7T zinc plated