Customer App
Rivet nut with flat head and knurled shank
Dome head aluminium knurled shank open
NUT-RIV-MHD-ALU-(0,5-3,0)-5,9X11,0-M4
Register now and access more than 10,000 products
- Rivet nuts combine two types of fastening: A blind rivet connection and an additional screw connection
- This primarily enables screw connections to be used in relatively thin-walled structural elements
The specified values relating to the maximum tractive force of the thread and the maximum tightening torque are guideline values. For this reason, the information may vary depending on the workpiece, drilled hole tolerance and roughness of the surface.
Datasheets(X)
CAD data (available after login)
 | |
Material | Aluminium |
Surface | Plain |
RoHS-compliant | Yes |
Thread type x nominal diameter (D) | M4 |
Length (l1) | 11 mm |
Head diameter (d1) | 9 mm |
Outer diameter (d2) | 5.9 mm |
Head height (k1) | 1.1 mm |
Min./max. grip range (s1) | 0.5-3.0 mm |
Tensile fracture load | 2840 N |
Shear-fracture load | 1070 N |
Max. tightening torque | 4 Nm |
Drill hole diameter | 6 mm |
Shank detail | With knurled shank |
Head type | Dome head |
Last viewed
Metric double box-end wrench with POWERDRIV®
Lock washer For shafts DIN 6799, phosphated steel
Combination wrench assortment, short type
Hexagonal bolt with thread up to the head ISO 4017, steel 8.8, zinc-plated, blue passivated (A2K)
Twist drill bit HSS DIN 338 type RN 130°
Glazing packer
Medium-strength screw retainer
TIME-SERT® UNC threaded bushing
REPLAST Plastic primer
Fixing clamp