Puller tool
Extractor tool
EXTRTL-SPNW300MM
Register now and access more than 10,000 products
- Cross-beam adjustment via hexagon nuts on pull legs
- Malleable cast iron cross-beam
- Nitrocarburised spindle
- High-strength legs
Datasheets(X)
After separating, the legs of the puller tool are screwed into the separating blade and the cross-beam is mounted. The spindle is screwed against the shaft. The part being extracted is pulled off gently and securely by tightening the spindle against the end of the shaft.
Min./max. external clamping width (A) | 90-300 mm |
Clamping depth (B) | 270 mm |
Spindle length | 280 mm |
Surface of the spindle | Nitrocarburised |
Material of spindle | Steel |
Material of cross-piece | Malleable cast iron |
Surface of the cross-piece | Zinc plated |
Width across flats | 27 mm |
Thread dimension | G 3/4 inch |
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!