Customer App
Pneumatic impact screwdriver DSS 1/2 inch Premium Power
Pneumatic impact wrench DSS 1/2 inch Premium POWER
IMPWRNCH-PN-DSS-1/2IN-PREMIUM-POWER
MASTER
Register now and access more than 10,000 products
- Excellent power-to-weight ratio
- Up to max. 1321 Nm Releasing torque at a weight of 1.98 kg
- Reliable maximum performance values and a long service life
- High-quality double impact mechanism and balanced cylinder with 6-disc motor
- 4-step power setting with convenient one-hand reversing ensures optimum, user-friendly adjustment for the relevant application
- Good handling with slip-resistant handle, optimum control and low sound level
- Highly ergonomic soft grip with sensitive trigger and integrated silencer
- Recommended maximum bolt size: M16
- Impact screwdrivers are not torque screwdrivers. Connections requiring a specific torque must be checked by means of a torque measuring device after tightening with the impact screwdriver.
- When the impact screwdriver is used regularly (e.g. for tyre maintenance), a little oil should be added through the air inlet, and approximately 2 strokes of gear grease should be added monthly via the grease nipple.
- Plug-in nipple not included in the scope of delivery
Datasheets(X)
Type description | DSS 1/2 inch Premium Power |
Tool holding device | 1/2-inch external square |
Max. working torque | 835 Nm |
Max. releasing torque | 1321 Nm |
Sound-pressure level | 80.6 dB |
Vibration | 7.78 m/s² |
Operating pressure | 6.3 bar |
Weight of machine | 1.98 kg |
Min. hose inner diameter | 10 mm |
Air consumption | 139 l/min |
Connection thread | 1/4 inch |
Length x width x height | 184 x 66 x 180 mm |
Last viewed
Trim clip
O-ring, metric
Thread repair single set TIME-SERT® 14 pieces
Twist drill bit HSS DIN 338 type RN 130°
Hex head screw with thread up to head ISO 4017, A2-70 stainless steel, plain
Twist drill bit HSCo DIN 338 type RN bronze point thinning
Pipe cutters
Brake cylinder rubber grease
Chuck with lock nut
ASSY® 4 CSMP universal screw Steel zinc plated partial thread countersunk milling pocket head