Customer App
Plastic angle connector
Angle connector plastic
QCKPLGCON-(ANGL-CON)-PLA-D8MM
Register now and access more than 10,000 products
- Operating temperature: -20°C to +80°C
- Permissible operating pressure max. 20 bar
Above a certain length, pipes "vibrate", irrespective of whether they are made of steel, copper or plastic. Therefore, all pipes should be secured on the body or on the frame using pipe clamps, rubberised if possible, wherein the distance should be 1 m and must not exceed 1.20 m.
Datasheets(X)
Suitable for plastic hoses of different material qualities. Not for brake systems, only for secondary consumers.
Installation:
Insert polyamide pipe into the quick-fit plug while overcoming slight resistance of the O-ring and pressing in pipe as far as it will go
Dismantling:
Press clamping ring against connection and pull out pipe
 | |
Outer diameter of pipe (T) | 8 mm |
Length (L) | 29.5 mm |
Material of housing | Plastic |
Material of gasket | Nitrile |
Min./max. temperature conditions | -20 to 80 °C |
Max. operating pressure | 20 bar |
Last viewed
HT brake protection
Interior trim clip, type 3
Bond + Seal structural adhesive
Disposable nitrile grip glove
Pin with nut For screw extractor set
Assortment of HES 412 handheld setting pliers 16 pieces in system case 8.4.1.
JIS B1189 steel 7T zinc plated fine thread
Flat blade fuse MINI Silver
Hexagonal bolt with thread up to the head ISO 4017, steel 8.8, zinc-plated, blue passivated (A2K)
Lambswool polishing pad, white