Customer App
Plastic T-connector
QCKPLGCON-(T-CON)-PLA-D8MM
Art.-no. 088502 08
EAN 4011231816472
Register now and access more than 6,000 products
- Operating temperature: -20 °C to +80 °C.
- Max. permissible operating pressure: 20 bar.
All pipes, regardless of material, tend to vibrate and move once they reach a certain length. For this reason, secure the brake line pipes (diameter 5 to 16 mm) to the bodywork or chassis with rubberised pipe clamps where possible. Maintain clamp spacing of 1 m to maximum 1.20 m.
Datasheets(X)
Suitable for plastic hoses of different material qualities. Not for brake systems, only for secondary consumers.
Installation:
Insert polyamide pipe into the quick-fit plug while overcoming slight resistance of the O-ring and pressing in pipe as far as it will go
Dismantling:
Press clamping ring against connection and pull out pipe
 | |
Outer diameter of pipe (D1) | 8 mm |
Outer diameter (G) | 13.5 mm |
Distance from centre of pipe to end of T-piece (L/2) | 23 mm |
Length (L) | 46 mm |
Height (H) | 29.5 mm |
Max. operating pressure | 20 bar |
Material of gasket | Nitrile |
Material | Plastic |
Material of serrated washer | Stainless steel |
Min./max. temperature conditions | -20 to 80 °C |
Last viewed
1/2 inch impact socket wrench insert hexagon, metric, short
Self-adhesive cable fastening cord clips
1/4" socket wrench insert metric, long
TIME-SERT thread repair single set 14 pieces
ASSY 4 CSMP universal screw Steel zinc plated partial thread countersunk milling pocket head
ASSY 4 CSMP universal screw Steel zinc plated partial thread countersunk milling pocket head
Polishing pads
Screwdriver for hexagon drive
Assortment of HES 412 handheld setting pliers 16 pieces in system case 8.4.1.
Screwdriver slotted striking cap with hexagon shank