Maintenance oil Multi

Name: Maintenance oil Multi
Brand: Würth
SKU: 089305540

Maintenance oil multi
MAINTOIL-MULTI-400ML

Art.-no. 089305540

EAN 4062856358663

All versions

Prices for customers after login

Maintenance oil Multi

Art.-no. 089305540

Prices for customers after login

Quantity

Exclusively for trade customers

Login/Register
Call customer service: 045-488-4186

Versatile multi-functional spray for a range of applications

Lubricates, cleans and maintains

Lubricates locks, hinges, bushings, chains, door locks

Stops creaking and squeaking and restores sliding properties of seized and jammed parts

Cleans and maintains plastic and metal parts such as e.g. panelling and housing

Removes rust and protects against corrosion

Loosens rusted bolts, pipe fittings, screws, nuts, joints, Bowden cables, shafts, locks etc.

Infiltrates and displaces moisture around electronics and electrics

Prevents corrosion on metals and electrical components, cable connections, relays, plugs, couplings etc.

Prevents freezing up of lock cylinders and closures

Resin, acid and silicone-free

Does not attack rubber, paint or plastics

The usage instructions are recommendations based on the tests we have conducted and our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.

Product information

Würth Catalogue

Datasheets(X)

Certificates/ Documents

Application area

Versatile multi-purpose spray

Instructions

Shake the can before use, spray the parts and let it take effect briefly. After using, spray the can upside down until it is empty.

Contents	0.4 l
Chemical basis	Mineral oil
Colour	Light yellow transparent
Min./max. processing temperature for can	-10 to 40 °C
Min./max. temperature conditions	-30 to 130 °C
Shelf life from production	24 Month
Min. processing temperature for can	-10 °C
Type of spray head	Standard spray head
Max. processing temperature for can	40 °C
Min. temperature conditions	-30 °C
Max. temperature conditions	130 °C
Min. flashing point	-80 °C
Silicone-free	Yes
Acid-free	Yes
Resin-free	Yes
AOX-free	Yes
White oil-free/mineral oil-free	No
VOC concentration (CH)	76.57 g/l
Kinematic oil basis viscosity	30 cSt
Material compatibility	Steel Non-ferrous heavy metals Stainless steel Epoxy glass fabric EPDM FKM PE PP Vinyl PTFE PL PA NBR
Conditions for viscosity of oil basis	at 40°C
Container	Aerosol can
Weight of content	270 g
Conditions to maintain shelf life from production	at 20°C

Suitable glove:

Product

Description

Nitrile chemical protective glove Long, heavy-duty design

Description:

Permeation level: 6

Permeation is the process by which a chemical moves through the material of a protective glove on a molecular level. The time from the initial contact between the chemical and the glove to the permeation of the material is the breakthrough time.

Measured breakthrough time

Permeation level

< 10 min

≥ 10 min

≥ 30 min

≥ 60 min

≥ 120 min

≥ 240 min

≥ 480 min

Important information:

The information given is based on experience and laboratory conditions and is designed as a guide. However, the actual suitability of a glove depends on the individual conditions of its use and must be confirmed by an appropriate test under operational conditions. Given the variety of materials and chemicals used, the possibility of incompatibility or usage problems for the wearer cannot be excluded in individual cases. We would be happy to advise you about optimum solutions.