Lead-free bodywork tinning paste

Name: Lead-free bodywork tinning paste
Brand: Würth
SKU: 098290

Bodywork tinning paste, lead-free
TINGPAST-BODY-LEADFREE-CAN-1KG

Art.-no. 098290

EAN 4046778655222

All versions

Prices for customers after login

Lead-free bodywork tinning paste

Art.-no. 098290

Prices for customers after login

Quantity

x 1 pcs

Exclusively for trade customers

Login/Register
Call customer service: 045-488-4186

Lead-free, high-quality S-Sn97Cu3 tinning paste. Flux type in accordance with DIN EN 29454-1.

Melting range: 230–250°C

Complies with the legal specifications of European Parliament Directive 2000/53/EC and the German national used vehicle law

Tin content 60–70%, lead-free

Product information

Würth Catalogue

Datasheets(X)

Certificates/ Documents

Application area

Lead-free, high-quality S-Sn97Cu3 tinning paste. Flux type in accordance with DIN EN 29454-1. Ideally suited for soft soldering, tinning and pre-tinning when repairing bodywork on passenger cars, lorries, agricultural and construction machinery

Instructions

The area to be repaired must be bare metal free from rust and grease prior to application. Apply a thin coat of paste and heat with a flame. Then wipe the soldering point using a clean, lint-free cloth.

Weight of content	1 kg
Material designation	S-Sn97Cu3
Smell/fragrance	Characteristic
Colour	Light grey
Max. melting temperature	250 °C
Min. melting temperature	230 °C
Sn composition of the brazing solder (weight-%)	65 %
pH value	Acidic
Conditions for pH value	at 20°C
Unleaded	Yes
Boiling point	100 °C
EN standard	29454-1

Suitable glove:

Product

Description

Nitrile chemical protective glove Long, heavy-duty design

Description:

Permeation level: 6

Permeation is the process by which a chemical moves through the material of a protective glove on a molecular level. The time from the initial contact between the chemical and the glove to the permeation of the material is the breakthrough time.

Measured breakthrough time

Permeation level

< 10 min

≥ 10 min

≥ 30 min

≥ 60 min

≥ 120 min

≥ 240 min

≥ 480 min

Important information:

The information given is based on experience and laboratory conditions and is designed as a guide. However, the actual suitability of a glove depends on the individual conditions of its use and must be confirmed by an appropriate test under operational conditions. Given the variety of materials and chemicals used, the possibility of incompatibility or usage problems for the wearer cannot be excluded in individual cases. We would be happy to advise you about optimum solutions.