Customer App
Insulation screw W-IS
Insulation screw W-IS
DWL-(W-IS)-(A2K)-WHITE-125-7X150
Register now and access more than 10,000 products
- With white screw head (RAL 9003) and wood-wool structure, galvanised steel
- Drive: TX 30
- Push-through installation
- Immediate load-bearing capacity
- Low drill hole depth (h0 = 25 mm)
- Low drill hole diameter (d0 = 6 mm)
- Minimal anchorage depth
- Quick, easy installation by screwing in the insulation screw
- Virtually no expansion effect
- Easy to fully remove
- Quick, easy installation with a cordless screwdriver or tangential impact screwdriver
- Integral trim cap made of flame-retardant plastic
Fire resistance (anchoring base: concrete C20/25): F90 = 0.015 kN, exposure to fire according to DIN 4102-02:1977-09 (uniform temperature curve)
The anchor can be used to fasten insulation materials to internal ceilings where the total weight of the thermal insulation and covering does not exceed 15 kg/m2.
Create the drill hole
Clean the drill hole
Screw in the insulating screw
Insulating plate attached
Fire resistance (anchoring base: concrete C20/25): F90 = 0.015 kN, exposure to fire according to DIN 4102-02:1977-09 (uniform temperature curve)
Datasheets(X)
- For attaching all types of insulation panel to concrete ceilings and walls (C20/25)
- For attaching wood-wool panels and multilayer panels to concrete ceilings and walls
- Suitable for attaching ceiling insulation panels, acoustic panels, wood-wool panels and multilayer panels to concrete ceilings and walls (e.g. garage ceilings, cellar ceilings)
Length | 150 mm |
Max. attachment height (t fix) | 125 mm |
Head diameter | 37 mm |
Nominal drill-bit diameter (d 0) | 6 mm |
Through-hole in the component to be connected (d f) | 8.0 mm |
Embedding depth (h nom) | 25 mm |
Drill hole depth (h 1) | 30 mm |
Material | Steel |
Surface | Zinc plated |
| Performance data: Concrete | ||
| Anchor | W-IS | |
| Recommended load without fire exposure | Frec = C20/25 [kN] | 0,15 |
| Fire resistance rating | F90 [kN] | 0,015 |
| Installation parameters: Concrete | ||
| Anchor | W-IS | |
| Nominal drill diameter | d0 [mm] | 6 |
| Drill cutting dia. | dcut ≤ [mm] | 6,25 |
| Drill hole depth | h1 ≥ [mm] | 30 |
| Embedment depth of the anchor sleeve | hnom [mm] | 25 |
| Through hole in the attachment | df ≤ [mm] | 8,0 |
Last viewed
Metric double box-end wrench with POWERDRIV®
Pressing sponge For gentle cleaning of all surfaces
Waterproof pin housing TE Superseal 1.5 series
Thread extractor set 25 pieces
Rust converter spray
Pin with nut For screw extractor set
VDE screwdriver, PH recessed head For working on live parts up to 1,000 V (AC) and up to 1,500 V (DC)
Hexagon Socket Head Cap Screw ISO 4762/DIN 912, A2-70 stainless steel
Raised contersunk head tapping screw, C shape with H recessed head DIN 7983, A2 stainless steel, plain. With cross recess.
Contact disc