Welcome to Würth Japan Ships the same day if ordered by 15:00

Trade customers

24 hour shopping

045-488-4186

10,000+ Products

Customer App

Insect remover with special foam formula

Insect remover, foam
INSREM-CANISTER-5LTR

Art.-no. 0893470002

EAN 4062856953844

Individual price display after login
Insect remover with special foam formula

Art.-no. 0893470002

Individual price display after login
Quantity
PU
x 1 pcs

Exclusively for trade customers

Register now and access more than 10,000 products

For fast and reliable removal of insect residues on glass, chrome, paint and plastic surfaces

The effective, deep-action active foam formula removes even the most stubborn and dried-on insect contamination quickly and without damaging the surface.


Ideal for use before any car wash.



Easy and quick to apply


Also ideally suited for pre-treatment before cleaning in a car wash



Gentle on materials, does not attack paint, chrome, plastic, rubber etc.

Notice

Do not use on heated paints or in the sun. Protect from frost.

Application area

The usage instructions are recommendations based on the tests we have conducted and on our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no liability is assumed in relation to the provision of this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee the consistent quality of our products. We reserve the right to make technical changes and further develop products. Please refer to the technical data sheet.

Product information

Datasheets(X)

Safety data sheet

Certificates/ Documents

 | 

 | 

Application area

For cleaning windscreen/windows, radiator grilles, bumpers, headlights, licence plates etc. affected by insect residues.

Instructions
  • Apply the foam evenly to contaminated surfaces (windshield, headlights, wing mirror front panel).

  • Allow the product to take effect for approx. 5 min. If necessary, wipe off the dirt with a damp cloth or sponge.

  • Then rinse thoroughly with clean water. If necessary, wash as usual or use a car wash.

  • Do not use on hot surfaces or in direct sunlight! Do not allow product to dry on.

  • To prevent scratches, quickly rinse off especially heavy road dirt before actually cleaning the area. Evenly spray undiluted product.

Contents

5 l

Weight of content

5370 g

Chemical basis

Anionic tenside

Colour

Colourless

pH value

10

Density

1.035 g/cm³

Density conditions

at 20°C

Shelf life from production

24 Month

Conditions to maintain shelf life from production

at 15°C to 25°C

AOX-free

Yes

Silicone-free

Yes

Bio-degradable

Yes

Container

Canister

Suitable glove:
 
Product
Description
Chemical protective glove PVC w. backing fabric
Chemical protective glove PVC w. backing fabric
Description:
Permeation level: 6
Very robust, submersible PVC glove with cotton support fabric
Nitrile chemical protective glove long, heavy-duty design
Nitrile chemical protective glove long, heavy-duty design
Description:
Permeation level: 6
Disposable nitrile glove
Disposable nitrile glove
Description:
Permeation level: 4
Liquid-proof, food-safe disposable glove
Disposable nitrile grip glove
Disposable nitrile grip glove
Description:
Permeation level: 4
Unique, diamond texture for optimal grip
Permeation is the process by which a chemical moves through the material of a protective glove on a molecular level. The time from the initial contact between the chemical and the glove to the permeation of the material is the breakthrough time.
Measured breakthrough time
Permeation level
< 10 min
0
≥ 10 min
1
≥ 30 min
2
≥ 60 min
3
≥ 120 min
4
≥ 240 min
5
≥ 480 min
6

Important information:

The information given is based on experience and laboratory conditions and is designed as a guide. However, the actual suitability of a glove depends on the individual conditions of its use and must be confirmed by an appropriate test under operational conditions. Given the variety of materials and chemicals used, the possibility of incompatibility or usage problems for the wearer cannot be excluded in individual cases. We would be happy to advise you about optimum solutions.

Art.-no.
Cust. Mat. No.

Hazardous Material

Product information

Datasheets()

Datasheets ()

CAD data  | 

Certificates/ Documents

 | 

 | 

Technical information