Customer App
Glazing packer
Glazing packer
GLZNGPCKR-WO.SLPPROT-44X2
Register now and access more than 10,000 products
- Material: Polypropylene
- Ageing-resistant
- Temperature-resistant
- Optimised rib system for high load-bearing capacity
- Verified compatibility with conventional glazing sealants (based on polysulphide, polyurethane and silicone)
- Ventilation channel for vapour pressure compensation (from 32 mm block width and 2 mm thickness upwards)
Datasheets(X)
Block alignment
Blocks should be positioned about one block length from the corners of the glazing units. The distance can be reduced to 20 mm in some cases if the risk of glass breakage is not increased by the frame and the position of the block. Blocks can be positioned about 250 mm from the corners of very wide, fixed glazing units. Glazing blocks must be positioned over a frame fastening point. The number of glazing blocks should be increased accordingly for heavy glazing units.
Thickness | 2 mm |
Width | 44 mm |
Length | 100 mm |
Material | PP - Polypropylene |
Colour | Blue |
Last viewed
1/4 inch socket wrench insert, metric short
Hose clamp with clamping jaw
Sealing ring, aluminium, shape A
Double open-end wrench
Turn signal and brake light bulb
Thin-walled heat-shrink hose Shrink rate 2:1 without internal adhesive
Metric double box-end wrench with POWERDRIV®
Clamping jaws For double flaring tool
Mini ratchet screwdriver 12 pieces
Self-adhesive hook and loop fastener tape