Customer App
Circlip pliers, shape B for shaft circlips
DIN 5254 shape B shaft circlip
CRCLIPPLRS-B-(19-60MM)
Register now and access more than 10,000 products
Standard: DIN 5254
Handle: Plastic-coated
Guarantees a secure grip, prevents slippage
Tip from compressed spring steel
Optimised stability, even with seized rings.
Inserted tips
Offers maximum strength when loosening seized rings and allows rings to be installed with minimal distortion.
Screwed and mounted joint
High precision and optimised movement.
Large locating faces
Rings mounted without torsion.
Pliers head
Narrow design for optimum access to workpiece, including in hard-to-reach spots.
Internal spring
- Inside screwed joint for protection
- Does not obstruct work
- Cannot be soiled or lost
Datasheets(X)
Circlip pliers for outer rings (shafts).
 | |
Length (L1) | 165 mm |
Min./max. grip range | 19-60 mm |
Jaws length (L2) | 40 mm |
Hook length (L3) | 15 mm |
Material | Steel |
Diameter of tenon (D1) | 1.8 mm |
Form | B |
Last viewed
3/8 inch extension
Hand tap, third tap HSS DIN 352
WÜTOP® Heimshield
Thread repair single set TIME-SERT® 14 pieces
UBS wax Super dry 200 transparent
1/2 inch power cardan joint With 1/2 inch square drive and ball lock
1/2" socket wrench insert metric, bi-hex, short
Hexagonal bolt with thread up to the head ISO 4017, steel 8.8, plain
Hexagon tapping screw DIN 7976, zinc-plated steel, blue passivated (A2K), shape C (with tip)
Slotted raised countersunk head screw DIN 964, steel 4.8, zinc-plated, blue passivated (A2K)