Customer App
Circlip pliers, shape A for shaft circlips
DIN 5254 shape A shaft circlip
CRCLIPPLRS-A-(40-100MM)
Register now and access more than 10,000 products
Standard: DIN 5254
Handle: Plastic-coated
Guarantees a secure grip, prevents slippage
Tip from compressed spring steel
Optimised stability, even with seized rings.
Inserted tips
Offers maximum strength when loosening seized rings and allows rings to be installed with minimal distortion.
Screwed and mounted joint
High precision and optimised movement.
Large locating faces
Rings mounted without torsion.
Pliers head
Narrow design for optimum access to workpiece, including in hard-to-reach spots.
Internal spring
- Inside screwed joint for protection
- Does not obstruct work
- Cannot be soiled or lost
Datasheets(X)
Circlip pliers for outer rings (shafts).
 | |
Length (L1) | 225 mm |
Min./max. grip range | 40-100 mm |
Jaws length (L2) | 70 mm |
Material | Steel |
Diameter of tenon (D1) | 2.25 mm |
Form | A |
Last viewed
C 6.3 TX bit (1/4 inch)
Barrel-shaped adapter For dent lifter and PinPuller
Slotted cheese head DIN 84, brass, plain
3/8 inch socket wrenches Assortment of 42 pieces
Hose clamp with asymmetrical lock
Thread repair single set TIME-SERT® 14 pieces
ASSY® 4 CSMP universal screw Steel zinc plated partial thread countersunk milling pocket head
Pan head tapping screw, C shape with H recessed head DIN 7981, steel, zinc-plated, blue passivated (A2K), shape C, with tip
Slotted cheese head DIN 84, brass, plain
Metric double box-end wrench with POWERDRIV®