Bond and Seal All-in-One structural adhesive - SPRSEAL-KD-COMBI-WHITE-CART-310ML

Bond and Seal All-in-One structural adhesive - SPRSEAL-KD-COMBI-WHITE-CART-310ML - 1

Bond and Seal All-in-One structural adhesive

Name: Bond and Seal All-in-One structural adhesive
Brand: Würth
SKU: 0893236110

Structural adhesive bond and seal all-in-one
SPRSEAL-KD-COMBI-WHITE-CART-310ML

Art.-no. 0893236110

EAN 4046778418162

All versions

Prices for customers after login

Bond and Seal All-in-One structural adhesive

Art.-no. 0893236110

Prices for customers after login

Quantity

Exclusively for trade customers

Login/Register
Call customer service: 045-488-4186

Hybrid-based sprayable and brushable seam sealant for restoring the original structure

Sprayable and brushable

One product for two applications

Broad range of OEM structures can be readily reproduced

Solvent-free

No material shrinkage after drying

Satisfies the latest environmental protection requirements

Permanently elastic once hardened

Minimises the formation of cracks in the paint, which can be caused by vibrations or compressive loads

Excellent stone chip protection

Resistant to mechanical damage

Can be painted over up to five days later

Can be painted over both before skin formation (wet-in-wet) and also up to five days later with all commercially available paints

Ideally suited for painting over with water-based paints

UV-resistant

Very good ageing behaviour, even at unpainted seams

Very broad adhesive range

Adheres to most surfaces without priming

Permanent connections

Isocyanate-free, PVC-free and silicone-free

Notice

Preliminary tests are required with critical surfaces such as PE, PP, PS, PC, PMMA and PTFE

The best adhesion between the paint and the sealant is achieved when it is painted over as soon as possible following application

The working properties, such as consistency, are dependent on the ambient temperature

Application area

Bond + Seal products		B+S 0890 100 1 - 6 0890 100 111 - 3 0890 100 181 - 3 0890 100 11 + 13	B+S Power 0893 235 1 0893 235 2 0893 235 3	B+S Fast 0890 100 710 0890 100 720 0890 100 730	B+S Combi 0893 236 110 0893 236 120 0893 236 130
Metal	Aluminium	⎷¹	⎷⁴	⎷¹	⎷¹
	Lead	x	x	x	x
	Stainless steel	⎷¹	⎷⁴	⎷¹	⎷¹
	Copper	⎷¹	⎷¹	⎷¹	⎷¹
	Brass	⎷¹	⎷¹	⎷¹	⎷¹
	Steel/iron	⎷¹	⎷⁴	⎷¹	⎷¹
	Zinc	⎷¹	⎷⁴	⎷¹	⎷¹
Plastics	ABS	⎷²	⎷²	⎷²	x
	GRP	⎷²	⎷²	⎷²	⎷
	Rubber/neoprene	x	x	x	⎷
	Rigid foams	⎷²	⎷²	⎷²	⎷
	PE	x	x	x	x
	PMMA	⎷⁵	⎷⁵	⎷⁵	-
	Polyamide	⎷⁵	⎷⁵	⎷⁵	⎷
	Polycarbonate = PC	⎷⁵	⎷⁵	⎷⁵	-
	Polystyrene (not foam!)	⎷²	⎷²	⎷²	-
	PP	-	-	-	-
	PTFE	-	-	-	-
	Polyurethane = PU	⎷²	⎷²	⎷²	⎷
	Hard PVC	⎷²	⎷⁴	⎷²	⎷
	Silicone	-	-	-	-
	Styrofoam	-	-	-	-
Surface must be pre-treated;refer to the technical data sheet for the relevant application. 1. Prime with Primer for Metal 0890 100 61 2. Prime with Primer for P/W/S 0890 100 62 3. Pre-treat with Penetrating Primer 0890 545 10 4. Pre-treat with Activating Cleaner, 0890 100 60 5. Varioprimer safe + easy, 0890 024 021/0890 024 101

Bond + Seal products		B+S 0890 100 1 - 6 0890 100 111 - 3 0890 100 181 - 3 0890 100 11 + 13	B+S Power 0893 235 1 0893 235 2 0893 235 3	B+S Fast 0890 100 710 0890 100 720 0890 100 730	B+S Combi 0893 236 110 0893 236 120 0893 236 130
Painted surfaces	Two-part paints, stove enamels, Cathodic dip painted panels	⎷⁴	⎷⁴	⎷⁴	⎷⁴
Wood and wooden materials	Wood (including MDF, chipboard)	⎷²	⎷²	⎷²	⎷²
	Laminated panels (Resopal, Ultrapas)	⎷⁴	⎷⁴	⎷⁴	l
	HPL	⎷⁴	⎷⁴	⎷⁴	⎷⁴
	Decorative panels	⎷	⎷	⎷	⎷
	Cork	⎷²	⎷²	⎷²	⎷
Stone and construction materials	Concrete	⎷²	⎷²	⎷²	⎷²
	Bituminous surfaces	-	-	-	-
	Aerated concrete, gypsum, gypsum plasterboard	⎷³	⎷³	⎷³	⎷³
	Synthetic stone (Corian, Varicor)	⎷²	⎷²	⎷²	⎷
	Delicate natural stone (e.g. marble)	-	-	-	-
	Natural stone, brick	⎷²	⎷²	⎷²	⎷²
	Cement fibreboards	⎷³	⎷³	⎷³	⎷
Other	Enamel	⎷⁵	⎷⁴	⎷⁵	⎷⁴
	Glass	⎷⁵	⎷⁴	⎷⁵	⎷⁴
	Fibre glass	-	-	-	-
	Mirror	-	-	-	-
	Porcelain, ceramic, tiles	⎷⁵	⎷⁴	⎷⁵	⎷⁵
	Paper	⎷	⎷	⎷	⎷
	Cardboard	⎷	⎷	⎷	⎷
	Mesh	-	-	-	-
	Leather	-	-	-	-
Surface must be pre-treated;refer to the technical data sheet for the relevant application. 1. Prime with Primer for Metal 0890 100 61 2. Prime with Primer for P/W/S 0890 100 62 3. Pre-treat with Penetrating Primer 0890 545 10 4. Pre-treat with Activating Cleaner, 0890 100 60 5. Varioprimer safe + easy, 0890 024 021/0890 024 101

The usage instructions are recommendations based on the tests we have conducted and our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.

Product information

Würth Catalogue

Datasheets(X)

Certificates/ Documents

Application area

For permanently elastic, highly adhesive seam seals, and for restoring the original structure following accident repair work, e.g. in the engine compartment, luggage compartment, undercarriages, wheel wells and on all overlapping connecting seams.

Instructions

The surfaces must be clean, dry and free from grease

Applied using cartridge or pneumatic guns. The required textures and coat thicknesses are determined by the distance to the object or through the air pressure.

Further information in the technical data sheet

Contents	310 ml
Chemical basis	Hybrid polymer
Colour	White
Shore A hardness	50
Min. skin-formation time /conditions	20 min / at 23°C and 50% relative humidity
Ultraviolet resistance	Yes
Min./max. processing temperature	5 to 30 °C
Min./max. temperature resistance	-40 to +80 °C
Shelf life from production	15 Month
Conditions to maintain shelf life from production	at 5°C to 25°C
Silicone-free	Yes
Solvent-free	Yes
Isocyanate-free	Yes
Full curing speed	3 mm/d
Min. skin-formation time	20 min

Additional accessory:

Product

Description

Quantity

Price
/PU

Flanged butt seam nozzle for 300 ml + 310 ml metal cartridges

NOZ-HEMFLG-SEALANT

Art.-no. 0891660

Fine thread

x 25 pcs

Tex-Rein cleaning cloth

CLNCLTH-(TEX-REIN)-27X38CM-150PCS

Art.-no. 0899810

Extra fine cleaning cloth for dust and lint-sensitive areas

The packaging unit defines the number of articles in one packaging. In the catalog segment you can choose from different packaging units if a pop-up menu is displayed.

Just leave the field empty if you don't know the packaging unit when directly entering the article number in the shopping basket or when importing with Easy-/VarioScan. The packaging unit will be determined automatically.

The article number is made up of the following: VVVVAAABBB
VVVV = 4 digits for prefix number (please note that the first digit is currently always 0)
AAA = 3 digits for dimension part 1
BBB = 3 digits for dimension part 2

Example article number structures:
Example 1: Screw with dimensions of 4x10 mm:
VVVVAAABBB
00574 10 (2 spaces between the 4 and the 10)

Example 2: Screw with dimensions of 10x20 mm:
VVVVAAABBB
005710 20 (1 space between the 10 and the 20)

Example 3: Flat washer with an internal diameter of 6 mm:
VVVVAAABBB
04076

Price per packaging unit (PU):
The displayed price is always in line with the displayed packaging, if the PU is 250 the price for 250 units, if the PU is 300 the price for 300 units.

Price with price key representation (PSL):
The price always applies to a quantity ruled through the price key:
Price for 1 unit
Price for 100 units
Price for 1000 units

The quantity shows the number of pieces or units of measure contained in the order or delivery for the respective article.

In contrast to sales packaging and secondary packaging, the disposal costs for chemical-technical products are shown separately. The breakdown of the individual costs can be found on the relevant products and also in the shopping cart, as well as in our General Terms and Conditions (GTC).

Additive article:

Product

Description

Quantity

Price
/PU

Flanged butt seam nozzle for 300 ml + 310 ml metal cartridges

NOZ-HEMFLG-SEALANT

Art.-no. 0891660

Fine thread

x 25 pcs

The quantity shows the number of pieces or units of measure contained in the order or delivery for the respective article.

Suitable glove:

Product

Description

Nitrile chemical protective glove Long, heavy-duty design

Description:

Permeation level: 2

Permeation is the process by which a chemical moves through the material of a protective glove on a molecular level. The time from the initial contact between the chemical and the glove to the permeation of the material is the breakthrough time.

Measured breakthrough time

Permeation level

< 10 min

≥ 10 min

≥ 30 min

≥ 60 min

≥ 120 min

≥ 240 min

≥ 480 min

Important information:

The information given is based on experience and laboratory conditions and is designed as a guide. However, the actual suitability of a glove depends on the individual conditions of its use and must be confirmed by an appropriate test under operational conditions. Given the variety of materials and chemicals used, the possibility of incompatibility or usage problems for the wearer cannot be excluded in individual cases. We would be happy to advise you about optimum solutions.