Customer App
Air tool fittings 1500 series
Nipple, comfort connection, series 1500
NPL-PN-S1500-D8MM-ET12MM
Register now and access more than 10,000 products
High air flow rate of up to 1,950 liters/minute (69 cubic feet/minute) and maximum operating pressure of 16 bar (232 psi).
Enables optimum compressed-air supply and output utilization of compressed-air consumers. This results in increased productivity and decreased energy costs.
Ergonomically designed locking bush.
Ensures a secure grip and prevents slipping off.
Low coupling force enables one-handed operation.
Only minimal force required for simple, fast, safe coupling and decoupling.
Air-tight connections.
Low energy consumption and high level of efficiency.
Hardened steel nipples and locking bushes.
For max. loadbearing capacity and long service life.
Exposed surfaces are chrome-plated, nickel-plated or galvanized.
High corrosion resistance and protection, even under demanding conditions.
Series 1500 fittings comply with the Asian standard and have a nominal diameter of 7.5 mm.
Euro profiles are compatible with the 2000 Series
Datasheets(X)
Professional use in compressed air systems in mechanical and tire workshops, bodyshops, metalworking and carpentry
Material | 0 - not applicable |
Length (L) | 45 mm |
Surface | 0 - not applicable |
Width across flats (SW) | 0 - not applicable |
Max. pressure | 64 bar |
Flow capacity | 1950 l/min |
Last viewed
Rivet nut with flat head and knurled shank
Screwdriver PH 3C handle with hexagon shank
Countersunk tapping screw shape C with H recessed head DIN 7982, steel, zinc-plated, blue passivated (A2K)
Hexagon nut DIN 934, steel I6I/I8I, zinc-plated, blue passivated (A2K)
Sealing ring
Flat chisel For pneumatic chipping hammers
1/2 inch socket wrench insert, metric
1/4 inch socket wrench insert, metric short
WÜTOP® Heimshield
JIS B1256 steel 100 HV zinc plated