Adhesive sealing tape EURASOL<SUP>®</SUP> MAX - ADHSEALTPE-(EURASOL-MAX)-60MM

Adhesive sealing tape EURASOL<SUP>®</SUP> MAX - ADHSEALTPE-(EURASOL-MAX)-60MM - 1

Adhesive sealing tape EURASOL<SUP>®</SUP> MAX - ADHSEALTPE-(EURASOL-MAX)-60MM - 2

Adhesive sealing tape EURASOL<SUP>®</SUP> MAX - ADHSEALTPE-(EURASOL-MAX)-60MM - 3

Adhesive sealing tape EURASOL<SUP>®</SUP> MAX - ADHSEALTPE-(EURASOL-MAX)-60MM - 4

Adhesive sealing tape EURASOL<SUP>®</SUP> MAX - ADHSEALTPE-(EURASOL-MAX)-60MM - 5

Adhesive sealing tape EURASOL^® MAX

Name: Adhesive sealing tape EURASOL ® MAX
Brand: Würth
SKU: 0992710160

Adhesive sealing tape EURASOL Max
ADHSEALTPE-(EURASOL-MAX)-60MM
EURASOL

Art.-no. 0992710160

EAN 4050641652799

All versions

Similar products

Prices for customers after login

Adhesive sealing tape EURASOL^® MAX

Art.-no. 0992710160

Prices for customers after login

Quantity

Exclusively for trade customers

Login/Register
Call customer service: 045-488-4186

Particularly adhesive, UV- and weather-resistant adhesive tape for airtight and wind-tight bonding of underlay membranes and roof protection films, vapour barriers, vapour retarders and façade membranes.

Extremely high resistance to UV and weathering thanks to black special film

Maximum protection in rain and wind, especially for outdoor adhesive bonds

Permanently protects against building damage and energy loss in insulation

Bonding can be exposed to weathering outdoors for up to 12 months

Contains especially strong and high-quality adhesive film

Extremely strong adhesion on a range of surfaces

Maximum safety with blower door tests

Safe bonding even at low temperatures down to -10°C

Extremely flexible support material in lateral direction

Adapts superbly to openings

Repairs and seams are virtually invisible on black films

Solvent-free

German Energy Saving Ordinance (EnEV)

Our products featuring the EMICODE label are low emission/environmentally compatible. The EMICODE classification system awards labels to construction products that comply with the very stringent health and environmental requirements of recognised institutes.

Notice

Eurasol Max is ideal for bonding WÜTOP roof protection films, WÜTOP vapour barriers and WÜTOP vapour retarders and has been tested on these films. We therefore recommend the use of these WÜTOP films.

EMICODE EC1plus: Very low emission – the EMICODE classification system characterises the environmental and health compatibility of construction products. The lowest-emission products bear the EC1plus mark.

The usage instructions are recommendations based on the tests we have conducted and our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.

Product information

Würth Catalogue

Datasheets(X)

Certificates/ Documents

Application area

Film surfaces:

Lasting bonding of underlay membranes and roof protection films, vapour barriers and vapour retarders, as well as for façade films. Bonding of overlapping sections of these films and connections and openings. Repairing damage to underlay membranes and roof protection films.

Panel surfaces:

In conjunction with Eurasol HaftPlus for adhesive joint and connection bonding of soft particle boards and for adhesive bonding of base connections. Airtight joint adhesion of OSB boards. Suitable for use outdoors and indoors.

When bonding sub-cladding plates (overlap and/or joint adhesion), the width of the tape must be at least 100 mm as per the data sheet of the ZVDH (German central roofing association).

Instructions

Fix Eurasol Max to the overlap seam by removing just a few centimetres of the masking paper. Pulling off the masking paper bonds the adhesive tape over the entire length by pressing it on. Please ensure sufficient contact pressure. After adhesion, cut the adhesive tape with a knife. The application surface must be dry and free from grease, chips and dust. Ensure that no standing water can build up within the bonded area. Do not subject the adhered tape to long-term tension.

Backing material	PE film with mesh
Adhesive base	Acrylate dispersion
Colour	Black
Width	60 mm
Length	25 m
Min./max. processing temperature	-10 to 50 °C
Min./max. temperature resistance	-40 to 100 °C
Ultraviolet resistance	12 months
Solvent-free	Yes
Shelf life from production/conditions	Unlimited / in closed original packaging at + 5°C to + 23°C and 50% to 60% humidity
Sustainability	Pollutants / Emissions

Additive article:

Product

Description

Quantity

Price
/PU

Connection adhesive ALL-IN-ONE

CONADH-(ALL-IN-ONE)-310ML

Art.-no. 0893700111

For the permanent sealing of all connection joints to ensure that they are air-tight and windproof and for fitting indoor and outdoor windows and doors.

The packaging unit defines the number of articles in one packaging. In the catalog segment you can choose from different packaging units if a pop-up menu is displayed.

Just leave the field empty if you don't know the packaging unit when directly entering the article number in the shopping basket or when importing with Easy-/VarioScan. The packaging unit will be determined automatically.

The article number is made up of the following: VVVVAAABBB
VVVV = 4 digits for prefix number (please note that the first digit is currently always 0)
AAA = 3 digits for dimension part 1
BBB = 3 digits for dimension part 2

Example article number structures:
Example 1: Screw with dimensions of 4x10 mm:
VVVVAAABBB
00574 10 (2 spaces between the 4 and the 10)

Example 2: Screw with dimensions of 10x20 mm:
VVVVAAABBB
005710 20 (1 space between the 10 and the 20)

Example 3: Flat washer with an internal diameter of 6 mm:
VVVVAAABBB
04076

Price per packaging unit (PU):
The displayed price is always in line with the displayed packaging, if the PU is 250 the price for 250 units, if the PU is 300 the price for 300 units.

Price with price key representation (PSL):
The price always applies to a quantity ruled through the price key:
Price for 1 unit
Price for 100 units
Price for 1000 units

The quantity shows the number of pieces or units of measure contained in the order or delivery for the respective article.

In contrast to sales packaging and secondary packaging, the disposal costs for chemical-technical products are shown separately. The breakdown of the individual costs can be found on the relevant products and also in the shopping cart, as well as in our General Terms and Conditions (GTC).