Customer App
Adapter Hose
Adapter hose AdBlue
ADAPTHOSE-F.ADDPROD-ADBLUE
Register now and access more than 10,000 products
Datasheets(X)
For use with 10-l AdBlue canister. Allows easy and clean filling of cars with AdBlue.
Screw the adapter hose onto the thread of the 10-l canister. Open the filler cap of the AdBlue tank. Place the adapter onto the AdBlue tank nozzle and connect by turning clockwise. Then press the adapter against the tank nozzle to start the filling process. After filling, pull back the filling hose and unscrew it again.
Close the filler cap on the AdBlue tank again.
Last viewed
Hose clamp A4 with asymmetrical lock made entirely of stainless steel
3/8 inch socket wrenches Assortment of 42 pieces
Wing repair washer According to DIN 522, zinc-plated steel, blue passivated (A2K)
Threaded fuse MIDI
Metric combination wrench with POWERDRIV®
Thread repair single set TIME-SERT® 14 pieces
Triple square bit
Wing repair washer According to DIN 522, zinc-plated steel, blue passivated (A2K)
Hexagon Socket Head Cap Screw ISO 4762/DIN 912, A2-70 stainless steel
Pump for 3000 ml hand cleaner dispenser